Page 32 of 33
Side Stand Tab Washer FRA23740 Fits Cali 1100, Cali EV, Cali Stone, Cali Jackal, Cali Vintage, Cali 3, T3 Cali, Convert, G5 Locking or tab washer for long side stand Also known as Guzzi ref. 13432740 or 13432741 This part is due back in stock soon, call 01484 841395 to reserve yours 03432740 GU03432740 03 43 27 40 0343 2740 0343.2740 03.43.27.40 £28.00 INC VAT £23.33 EX VAT Side Stand Switch ELA63542 Fits Griso ALL, Breva 750, Breva 850, Breva 1100, Breva 1200, Stelvio. Norge ALL, 1200 Sport ALL, Nevada 750 (2009-), V7 Cafe, V7 Classic, Bellagio Sidestand cutout switch See ELA81319 for rotary switch that was fitted to some models This part is available by special order, request a quote 639542 MG639542 £28.00 INC VAT £23.33 EX VAT Torque Arm Bush WHA88345 Fits Bellagio, 1200 Sport ALL, Breva 850, Breva 1100, Breva 1200, Griso ALL, Norge ALL, Stelvio ALL Dimensions: 10mm ID x 30mm OD x 30mm Updated bush with thicker rubber section for front of torque arm / cardan arm / reaction rod on CARC models This part is due back in stock soon, call 01484 841395 to reserve yours 883045 MG883045 £28.00 INC VAT £23.33 EX VAT Big End Shell 1st Oversize ENA30061 Fits 850/1000 ALL Models, V7 Special, 1100 Sport ALL, V11 Sport (1999-2001), Cali 1100 (1994-1997), Cali EV (1997-2001), Daytona (1991-1996), 850 GT, V7 Sport, S3, 750S Con rod bearing shell 1st oversize -0.254MM This part is available by special order, request a quote 30062001 GU30062001 30 06 20 01 3006 2001 3006.2001 30.06.20.01 £28.00 INC VAT £23.33 EX VAT Head Stud Short ENA12800 Fits 850/1000 ALL Models, Cali 1100 (1994-1997), Cali EV, Quota 1100, V11 Sport, 850 GT, V7 Sport Dimensions: M10 x 140mm Short head stud bolt in black Also known as Guzzi ref 14021860 This part is available by special order, request a quote 12021800 GU12021800 12 02 18 00 1202 1800 1202.1800 12.02.18.00 £27.60 INC VAT £23.00 EX VAT Clutch Cable CAA03066 Fits Cali Aluminium (2003-2003), Cali Titanium (2003-2004) Dimensions: 1390mm outer length without adjuster, 95mm free length, 9.9mm barrel nipple, 9.9mm barrel nipple Clutch cable We advise you to measure your existing cable before ordering in case you have a non standard set up. 1 in stock 03093066 GU03093066 03 09 30 66 0309 3066 0309.3066 03.09.30.66 £27.50 INC VAT £22.92 EX VAT
Gasket Kit Top End ENA00029 Fits Quota 1100, Cali 1100 (KC/KD Engine Prefix), 1100 Sport ALL, V11 Sport, Cali EV (1997-2005), Cali Jackal, Cali Stone, Special Dimensions: 92mm square barrel Top end gasket and seal set containing rocker cover, base, head and exhaust gaskets plus top end O rings Top end gasket set for one cylinder. Inlet manifold gasket ENA27155 available separately 3 in stock £27.00 INC VAT £22.50 EX VAT
Automatic Bleed Valve M6 Bleed Nipple BRA41651 Fits V35, V50, V65, V75, G5, S3, T3, Convert, 1000 SP, Le Mans 1, Le Mans 2, Nevada 750 (1991-2001), Nevada 350, V7 Sport, 850 GT,Stelvio ALL, Breva 1100, Breva 850, Breva 1200, 1200 Sport ALL, Norge ALL, Bellagio, Griso ALL Dimensions: M6 x 16mm The innovative Stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. Suitable for models with two bleed nipples per caliper Linked Guzzi brake systems are notoriously tricky to bleed, this M6 auto bleed nipple can save you hours of tedious squeezing and pumping! This bleed nipple is slightly longer than the standard part so some thread will be left showing even when fully closed. - Completely sealed by O-ring.
- Hydraulic system remains sealed even during the venting process.
- Reliable non-return function, thus one-man operation.
- System has been bled in minutes.
- Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
- For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
- Tested under extreme conditions by TÃœV Rheinland.
See BRA41652 for bleed valve cover 4 in stock
£26.50 INC VAT £22.08 EX VAT
Automatic Bleed Valve M8 Bleed Nipple BRA41654 Fits Breva 750, Nevada 750 (1998-2016), V7 Classic, V7 Cafe, V7 Racer, V7 II ALL, V7 III ALL, V9 ALL, V11 Sport ALL, Daytona ALL, 1100 Sport ALL, Cali EV, Cali Jackal, Cali Stone Dimensions: M8 x 1 The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping! - Completely sealed by O-ring.
- Hydraulic system remains sealed even during the venting process.
- Reliable non-return function on this auto bleed valve, thus one-man operation.
- System has been bled in minutes.
- Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
- For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
- Tested under extreme conditions by TÃœV Rheinland.
See BRA41652 for bleed valve cover. Fits front calipers only on models listed above. 2 in stock
£26.50 INC VAT £22.08 EX VAT
Bevel Box Pinion Bearing TRA92249 Fits 850/1000 ALL Models, Quota ALL, 1100 Sport ALL, Cali 1100 (1994-1997), Cali EV, Cali Vintage, Cali EV, Daytona ALL, Centauro, V7 Cafe, V7 Stone (2012-), V7 Special (2012-) Dimensions: 52mm OD Pinion roller bearing for drive box 1 in stock 92249227-z 92249227 GU92249227 92 24 92 27 9224 9227 9224.9227 92.24.92.27 £26.50 INC VAT £22.08 EX VAT
Page 32 of 33
|