Complete chromed Hepco and Becker rear luggage rack and pannier rails for Hepco and Becker panniers

To fit these frames, you may need to lower the tail light so this does not foul the rack. You may also need to drill the mudguard if you are to use the brace for the pannier frames. Pillion pegs may need moving forward slightly to accomodate panniers.

 This part is available by special order, request a quote

Satin finish oval stainless steel performance silencer from Mistral for your Stornello, the oval design has a performance look and compliments the classic scrambler styling of the Stornello. Supplied with removable DB killer this is more durable, stylish, lighter and better sounding than the original silencer

All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamp and certificate of homologation, reuse your existing silencer brackets with these silencers
No remap required

Release the music in your Guzzi!

 This part is available by special order, request a quote

Complete chromed Hepco and Becker rear luggage rack and pannier rails for Hepco and Becker panniers. Supplied as separate pannier rails and rack with black cross brace and mounting hardware

 This part is available by special order, request a quote

Black luggage rack wth rear plate designed to support the factory top case. Supplied with fitting hardware.

 This part is available by special order, request a quote

2S001997

Factory LED fog light / spot light set designed to be attached to crashbars FRA02028.

Also requires fitting kit ACA01999

 This part is available by special order, request a quote

2S002059

Chrome luggage rack and sissybar with backrest

Supplied with fixings, this rack is compatible with Hepco and Becker top boxes

 This part is available by special order, request a quote

Complete electronic ignition kit containing alternator mounted ignition pickup, fittings and amplifier unit. Works with standard 3 Ohm 12 volt coils and can be used to replace points or Motoplat ignition on models with Saprisa charging systems. The pickups for this kit are mounted on the alternator stator. Supplied with instructions in German with wiring diagrams.

2 year warranty on Sachse ignition kits

Eliminates vague timing due to worn distributors on big twins. Preloaded with nine ignition curves, two of which are designed for twin plugged bikes. Once fitted no further adjustment should be necessary. See this link for fitting instructions. Note that if you are replacing a Digiplex system you will also need to replace your 'square' coils with higher impedance 12 volt coils e.g. ELA31165

 This part is available by special order, request a quote

Luggage rack, with tall pillion back rest, grab rails and cushion.

Not suitable to mount a Hepco and Becker top box

 This part is due back in stock soon, call 01484 841395 to reserve yours

Complete electronic ignition kit containing alternator mounted ignition pickup, fittings and amplifier unit. Works with 12 volt 3 Ohm coils ELA14500 (big twins) and can be used to replace Digiplex on models with Ducati charging systems where the bike is converted to carburettors. This kit is just an ignition system, it will not control fuelling. The pickups for this kit are mounted on the alternator stator. Supplied with instructions in German with wiring diagrams.

2 year warranty on Sachse ignition kits

Once fitted no further adjustment should be necessary. Preloaded with nine ignition curves, two of which are designed for twin plugged bikes. See this link for fitting instructions. Some bikes may need at least one additional spacer to allow enough clearance for alternator cover to fit once pickup is fitted. Note that if you are replacing a Digiplex system you will also need to replace your 'square' coils with higher impedance 12 volt coils e.g. ELA14500

 This part is available by special order, request a quote

Tough Xplorer top box / top case to match Hepco and Becker Xplorer panniers, ideal for enduro touring. Extremely endurable combination of black anodised aluminium sheet and coloured shock-resistant plastic.

• Completely waterproof thanks to special seals
• Made of 1.5 mm thick plate aluminum and highly
impact-resistant plastic molding
• Absorbs impacts and ground contact
• Stable metal locks, integrated carrying handles
• Case and top case available with simultaneous
locking (please specify when ordering)
• Takes a full-face helmet
• Innovative side hinged design
• Fits all H&B rear racks and aluminum racks

 This part is available by special order, request a quote