Shop headings: New Spares | Used Spares | Accessories | Brands
Prolong battery life with this 9 stage smart battery charger, suitable for 6v, 12v AGM and lead acid batteries.
Weatherproof - suitable for use outside 6V / 12V 1A Auto-sensing charger. Suits all AGM, Lead Acid, Calcium and Gel batteries Charges 6v and 12v batteries Ring terminal and alligator clip harnesses included Spark proof Maintains full charge Simple, connect and wait for green light Overload / Short circuit protection See ACA96001 for a spare set of charging leads (e.g. for a separate bike).
1 in stock
£57.00
INC VAT
£47.50 EX VAT
Complete oil pump
This part is available by special order, request a quote
12146400-z 12146400 GU12146400 12 14 64 00
1214 6400 1214.6400 12.14.64.00
£314.01
INC VAT
£261.68 EX VAT
Factory upgraded oil pump with 16mm wide teeth as fitted to later big twins. Gives increased flow and can be retro fitted to earlier 850/1000 models which originally had 14mm teeth pumps
This part is available by special order, request a quote
30146400 GU30146400 30 14 64 00
3014 6400 3014.6400 30.14.64.00
£245.00
INC VAT
£204.17 EX VAT
Pair of high performance Dyna 12 volt 5 ohm dual lead ignition coils with angled HT lead socket. These are a performance coil which offer improved starting and performance for twin plugged models
Dyna Performance Replacment twin plug coils are high tech, top quality coils, designed for maximum performance. They produce spark voltages in excess of 30,000 volts and spark energies second to none. Dynatek coils are available in a wide variety of resistances and output configurations to allow easy replacement of stock coils. Dynatek coils work with factory electronic ignitions, points, and aftermarket ignitions.
These are a different size and shape from the original coils so you will need to fabricate a suitable coil mount. Guzziology recommends using electronic ignition with these coils as points may not be up to triggering these coils. See ELA00001 for crimp on HT lead connector.
Individual coils available by special order, call us for details
This part is available by special order, request a quote
1471650
£190.00
INC VAT
£158.33 EX VAT
Pair of performance Dyna 12 volt 5 ohm single lead ignition coils with angled HT lead socket. These are a cooler running coil that offer improved starting and performance
Dyna Performance Replacment Coils are high tech, top quality coils, designed for maximum performance. They produce spark voltages in excess of 30,000 volts and spark energies second to none. Dynatek coils are available in a wide variety of resistances and output configurations to allow easy replacement of stock coils. Dynatek coils work with factory electronic ignitions, points, and aftermarket ignitions.
These are a different size and shape from the original coils so you will need to fabricate a suitable coil mount.
Individual coils available by special order, call us for details. See ELA00001 for crimp on HT lead connector
This part is due back in stock soon, call 01484 841395 to reserve yours
1471650
£190.00
INC VAT
£158.33 EX VAT
Set of highly polished aluminium round barrel rocker covers (Guzzi ref. 17023550 or 17023560). Ideal for finishing off your restoration project
This rocker cover set also known as Guzzi ref. 14023550, these can be fited to square barrel models if fitted with adapter kit ACA30310
This part is available by special order, request a quote
17023560 GU17023560 17 02 35 60
1702 3560 1702.3560 17.02.35.60
£285.00
INC VAT
£237.50 EX VAT
Complete single disc clutch kit for 5 speed big twins containing flywheel, new deep spline clutch hub, friction plate, spring plate, pressure plate, and flywheel bolts. Suitable for all big twins with either distributor or crankshaft mounted ignition system, not suitable for Digiplex equipped models.
This clutch upgrade has the following advanges over the old two plate clutch:
This part is due back in stock soon, call 01484 841395 to reserve yours
£520.00
INC VAT
£433.33 EX VAT
Replacement clutch plate for single plate RAM clutches
Torque setting for fitting this is 25Nm with a thread locking compound
This part is available by special order, request a quote
£146.00
INC VAT
£121.67 EX VAT
Pair of black tubular rocker cover protector bars for round and square barrel engines, these will protect barrels and rocker cover in the unfortunate event of your bike being dropped
These head protectors bolt to the head using existing rocker cover bolts, they won't fit models with fairing lowers that wrap around the cylinders (e.g. Spada) without modification. To modify simply reduce the length of the rear section of the bar to stop short of the fairing and insert the supplied grommet. These bars are supplied with a plastic grommet for each end, this will need chamfering or leaving off on round head models with bolt on rocker cover breather pipes, e.g. T3. These bars will not fit on a T3 or other model with knee pads
This part is due back in stock soon, call 01484 841395 to reserve yours
£44.00
INC VAT
£36.67 EX VAT
Pair of chrome tubular rocker cover protector bars for round and square barrel engines, these will protect barrels and rocker cover in the unfortunate event of your bike being dropped
These head protectors bolt to the head using existing rocker cover bolts, they won't fit models with fairing lowers that wrap around the cylinders (e.g. Spada) without modification. To modify simply reduce the length of the rear section of the bar to stop short of the fairing and insert the supplied grommet. These bars are supplied with a plastic grommet for each end, this will need chamfering or leaving off on round head models with bolt on rocker cover breather pipes, e.g. T3. These bars will not fit on a T3 or other model with knee pads
This part is due back in stock soon, call 01484 841395 to reserve yours
£53.00
INC VAT
£44.17 EX VAT