Kit containing 1 pannier latch lock and clasp, key and 2 hinges (all chromed) for original type panniers

 1 in stock

This kit consists of a pair of complete panniers with lids and latches finished in black with pinstripes. Supplied with a pair of keys

Perfect for finishing off that T3 Cali restoration. These are a bolt on pannier, you will need to mark and drill these to suit your pannier frames. See FRA18540 for matching chrome frames and LUA14002 for replacement locks and hinges.

As with the original panniers these will not open fully on models fitted with the full T3 Cali seat and handrail. We recommend spacing the panniers out on 20-25mm rubber spacers when fitting to the pannier frame, this will allow the lids to open as far as possible. Alternatively you could remove the hinges and fit lock LUA14002 in their place.

 This part is available by special order, request a quote

 18482550 GU18482550 18 48 25 50
 1848 2550 1848.2550 18.48.25.50

Pair low and high chrome Voxbell horns. Rear of horn is black, two connection terminals on one horn, four on the other

 This part is due back in stock soon, call 01484 841395 to reserve yours

 14743700 GU14743700 14 74 37 00
 1474 3700 1474.3700 14.74.37.00

Also fits Laverda

Single replacement caliper piston for Brembo P2 F09 or P9 caliper as fitted to Spada rear.

NB you will require a pair of these. Also used on Benelli Sei rear. Corresponding caliper seal kit is BRA54722

 This part is due back in stock soon, call 01484 841395 to reserve yours

 20391310 GU20391310 20 39 13 10
 2039 1310 2039.1310 20.39.13.10

Also fits Benelli 900 Sei Rear (1983), Laverda 1000 RGS Fronts (1984)

Complete twin bleed F09 (P9) front right hand (when mounted behind fork leg, otherwise use as LH) replica Brembo brake caliper. Supplied with bleed nipples, dust cover, pins and spring. This can be used as a performance upgrade to replace the smaller piston P8 caliper fitted as standard to many Guzzis. Please see Guzziology for advice on how to perform this conversion.

Brake pads not included- see BRA33204

 This part is available by special order, request a quote

Complete twin bleed F09 (P9) front left hand (when mounted behind fork leg, otherwise use as RH) replica Brembo brake caliper. Also rear caliper (when mounted above and behind rear wheel spindle). Supplied with bleed nipples, dust cover, pins and spring. This can replace the P9 rear caliper as fitted to a 1000 SP, or can be used as a performance upgrade to replace the smaller piston P8 caliper fitted as standard to many Guzzis. Please see Guzziology for advice on how to perform this conversion.

Brake pads not included- see BRA33204

 Availability varies on this part, check availability

Complete Brembo F08 (P8) right hand (when mounted behind fork leg, otherwise use as LH) and rear Brembo brake caliper when mounted in underslung position (under and in front of wheel spindle). Supplied with bleed nipple, dust cover, pins, spring and a pair of brake pads, this is a replacement for the Brembo P8 single and twin bleed caliper

Supplied ready to bolt on and bleed. Also known as Guzzi ref. 18652201, 080137806. Ducati ref. 079937800.

 This part is due back in stock soon, call 01484 841395 to reserve yours

 17652360 GU17652360 17 65 23 60
 1765 2360 1765.2360 17.65.23.60

Also fits Benelli 354, Benelli Sei, Ducati, Hesketh

Complete Brembo F08 (P8) front left hand (when mounted behind fork leg, otherwise use as RH) Brembo brake caliper. Also rear caliper (when mounted above and behind rear wheel spindle). Supplied with bleed nipple, dust cover pins and spring, this is a replacement for the Brembo P8 single and twin bleed caliper. This can also be used as a replacement for the P9 caliper used on the 1000 SP rear

Supplied ready to fit and bleed. Also known as Guzzi ref. 28653301, 28652301. Ducati ref. 079937806

 This part is due back in stock soon, call 01484 841395 to reserve yours

 18652201 GU18652201 18 65 22 01
 1865 2201 1865.2201 18.65.22.01

Also fits Benelli 354, Benelli Sei, Ducati, Hesketh

Box spanner for gearbox output shaft nut

 This part is available by special order, request a quote

 14905400 GU14905400 14 90 54 00
 1490 5400 1490.5400 14.90.54.00

Output flange for drive box, engages with the driveplate on the wheel

Also known as Guzzi ref. 17351401. 8 hole M8 fixing in flange

 This part is available by special order, request a quote

 17351400 GU17351400 17 35 14 00
 1735 1400 1735.1400 17.35.14.00