1 litre of Agip SAE 7.5W fork oil. Eni Fork Oil 7.5W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use. The product is part of the Fork Oil series, which includes products with a different viscosity gradient to be selected in relation to the manufacturer's requirements and/or the damping action desired.

As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required.

Eni Fork Oil 5W is equipped with appropriate rheological features such as low temperature fluidity, high viscosity index and a very low sliding point, which results in smooth and uniform suspension behavior in a wide range of temperatures.

This product is characterized by high anti-wear properties, which ensure high protection and long service life to the lubricating parts.

The corrosion-resistant properties of Eni Fork Oil 5W allow effective protection of surfaces against corrosive phenomena.

Eni Fork Oil 5W has the necessary properties for the correct operation of the lubricated equipment, such as low foaming, low air retention, stability in hot conditions, and compatibility with rubber materials (gaskets).
Please note this part CANNOT be posted outside of the UK mainland area. ENI oils were previously sold under the AGIP name

 More than 5 in stock

1 litre of Agip SAE 15W fork oil, lighter weight than standard on most Guzzi models. Eni Fork Oil 15W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use.

As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 10W also available, use a combination of 10W and 15W to tune your damping more precisely

Please note this part CANNOT be posted outside of the UK mainland area. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades. ENI oils were previously sold under the AGIP name

 More than 5 in stock

Fork seal for Kaifa fork

Two fork types are used on recent small twins, we recommend checking your old fork seal before opening. These seals are for the Kaifa fork. Also known as Guzzi ref. 887884

 2 in stock

 887884 MG887884

Fork damper end cap spacer

 This part is available by special order, request a quote

 14527900 GU14527900 14 52 79 00
 1452 7900 1452.7900 14.52.79.00

Quality Ariete fork Seal

Also known as Guzzi ref. 03530526 and 03530524

 This part is due back in stock soon, call 01484 841395 to reserve yours

AP8163095

Fork dust cover

 More than 5 in stock

AP8163097

Also fits Aprilia Pegaso 650, Aprilia RXV 450

Fork seal

 2 in stock

 90403550 GU90403550 90 40 35 50
 9040 3550 9040.3550 90.40.35.50

Fork seal

2 required per pair of forks, no need to stack two seals per leg. Replaces Guzzi refs. 90403447, 90403448, 90403546

 More than 5 in stock

 90403449 GU90403449 90 40 34 49
 9040 3449 9040.3449 90.40.34.49

Also fits Gilera Runner, Benelli Sei 900

Quality Ariete fork Seal for V11 models with 43mm Marzocchi forks

Also known as Guzi ref. AP8163133

 More than 5 in stock

 01526195 GU01526195 01 52 61 95
 0152 6195 0152.6195 01.52.61.95

Also fits Aprilia Mana, Aprilia RST Futura (2001-2003), Aprilia 750 GT Shiver (2009), Aprilia Falco 1000 (2000-2003)

Fork seal for Marzocchi fork

Two fork types are used on recent small twins, we recommend checking your old fork seal before opening. These seals are for the Marzocchi fork. Also known as Guzzi ref. 599501 and 01530569

 5 in stock

 27530584 GU27530584 27 53 05 84
 2753 0584 2753.0584 27.53.05.84

Also fits Aprilia RS125 (2006-2010), Aprilia, RX-SX 125 (2008-2010), Gilera Nexus 500 E3 (2006-2008), Piaggio, X9 500 Evolution (2006-2007)