Page 2 of 14
4 Pin Female Block Connector ELA20012 Fits V35 ALL, V50 ALL, V65 ALL, 850/1000 ALL models, Quota 1100, Centauro, 1100 Sport Dimensions: 24mm x 9mm x 28mm 4 pin female block connector used for main loom connections. See ELA17603 for the Molex connectors that go in this block. Use male molex connectors with this block 2 in stock £2.30 INC VAT £1.92 EX VAT
4 Pin Male Block Connector ELA20017 Fits V35 ALL, V50 ALL, V65 ALL, 850/1000 ALL models, Quota 1100, Centauro, 1100 Sport Dimensions: 22mm x 9mm x 28mm 4 pin male block connector, used for main loom connections. See ELA17738 for the Molex connectors that go in this block. Use female molex connectors with this block 1 in stock £2.30 INC VAT £1.92 EX VAT
5 Pin Relay ELA29732 Fits T5, 1000S, Cali 3, Mille GT, V7 Classic, V7 Racer, Nevada 750 (2009-2013), Stelvio NTX 5 pin 12 volt relay suitable for side stand switch. Used for headlamp relay on Stelvio NTX Rated at 40 Ah 1 in stock 29732550 GU29732550 29 73 25 50 2973 2550 2973.2550 29.73.25.50 £18.30 INC VAT £15.25 EX VAT
5 Pin Relay Starter, Indicator and Horn ELA12732 Fits S3, Cali 2, T3, T4, Le Mans 3, Le Mans 2, Le Mans 1, Quota 1000, 1000 SP, SP II, T5, V35, V50, V65, Lario, 750 Targa, NTX 350, NTX 650, V35 Florida, 750X, V65 Florida, Imola Dimensions: 55mm x 33mm x 26mm overall 5 pin 12 volt relay suitable for starter, lights, indicator, flasher and horn applications Supercedes Guzzi ref. 12732500. Equivalent to 28732500 but with mounting bracket 5 in stock 19732500-z 19732500 GU19732500 19 73 25 00 1973 2500 1973.2500 19.73.25.00 £15.20 INC VAT £12.67 EX VAT
6 Pin Female Block Connector ELA30001 Universal Part Dimensions: 24mm x 14mm x 17mm 6 pin female block connector, used for main loom connections.
See ELA30000 for male 6 pin connector 3 in stock 200073021 £3.12 INC VAT £2.60 EX VAT
6 Pin Male Block Connector ELA30000 Universal Part Dimensions: 25mm x 6mm x 25mm 6 pin male block connector, used for main loom connections. See ELA30001 for female 6 block connector. 1 in stock 200073020 £3.60 INC VAT £3.00 EX VAT
600W Original Type Charging System Upgrade Bosch Equipped Models ELA00503 Fits Cali 2, T3, 750S, S3, 850T, T4, T5 (Series 1), Convert, G5, 1000 SP, SP II, Le Mans 1, Le Mans 2, Le Mans 3, Le Mans 1000, Mille GT (Series 1), V35, V35C, V35 Florida, Imola 2, V35 TT, V50, Monza, V65, V7 Sport Alternator upgrade kit for Bosch systems containing stator windings, wound rotor and replacement diode board. The superior design alternator has an output up to 300% greater than the original Bosch system. You may wish to fit a plastic alternator spacer ENA18150 if your model does not have one of these already (to improve cooling of the alternator). You will need front crank seal ENA90428 (Bosch seal) if you wish to fit this to a bike with a Saprisa charging system. This kit reuses your existing Bosch regulator and stator plate with brush holder, see ELA29703 for a replacement regulator and ELA17452 for brush holders. - Outputs 600W @5000 RPM
- Supplied with rotor removal tool
- For tapered crankshafts
Banish charging system worries with this kit!
Installation notes: - Remove stator and rotor using the supplied rotor removal tool
- Remove the old stator windings from the stator plate
- Solder in the new stator widing wires to the connection block on the stator plate and reconnect the
- Mount the replacement diode board, this should be protected from the weather but cooled by passing air
- Connect up the system as follows: Terminals U,V and W take the three yellow wires which should be connected to the stator plate block; Y goes to Y on the stator plate; The brown wires go to earth (we recommend using some earth sleeve on these if possible); Red goes to the battery positive terminal; regulator wiring remains as before (D+ to diode board, D- to earth and DF to brush holder)
- Check charge warning light is working (earth DF wire at stator to check bulb function)
- Turn motor over by hand to ensure everything is seated correctly, there should be an air gap between the stator windings amd rotor
Fit alternator cover and spacer This part is available by special order, request a quote £465.00 INC VAT £387.50 EX VAT 9 Pin Female Block Connector ELA20029 Fits V35 ALL, V50 ALL, V65 ALL, 850/1000 ALL models, Quota 1100, Centauro, 1100 Sport Dimensions: 19.5mm x 18.6mm x 25mm 9 pin female block connector, used for main loom connections. See ELA17603 for the Molex connectors that go in this block. Use male molex connectors with this block NB this connector has one zigzag end 1 in stock £3.40 INC VAT £2.83 EX VAT
9 Pin Male Block Connector ELA20028 Fits V35 ALL, V50 ALL, V65 ALL, 850/1000 ALL models, Quota 1100, Centauro, 1100 Sport Dimensions: 16mm x 17mm x 26mm 9 pin male block connector, used for main loom connections. See ELA17738 for the Molex connectors that go in this block. Use female molex connectors with this block NB this connector has one zigzag end 2 in stock |