Lighter flywheel (2.2kg) for dual plate clutch, this will improve acceleration, engine pickup and gear shifts

 This part is available by special order, request a quote

 04067000 GU04067000 04 06 70 00
 0406 7000 0406.7000 04.06.70.00

Pair of Nitro Race Piggyback Stainless Steel Shocks. Featuring a stainless steel 38mm damper unit with 90mm piggyback reservoir, fully re-buildable, 18mm piston rod, 10 position damping adjustment with automatic compression / rebound balance. 73mm outside diameter natural stainless steel spring, silver anodised aluminium fittings. Fully progressive spring pre-load adjustment. Supplied as a complete pair with mounting bushes, spring adjusting C spanner and 2.5mm hexagon key. These units are designed to be fitted with the damping adjuster at the bottom but will operate in either orientation.

The suspension on the V7 II models is notoriously cheap and is upgraded by most owners, but all V7 models will benefit from this suspension upgrade which will transform handling. Fully adjustable damping and preload allows you to set up your bike handling as it should.

Combine with our fork upgrade kit to transform the handling of your V7.

All Hagon shocks have a 2 year unlimited kilometer guarantee and are TUV approved. Also available by special order with chromed springs and/or polished alloy body, please enquire for details. All Hagon shocks have a 2 year unlimited kilometer guarantee and are TUV approved.

 This part is available by special order, request a quote

Bright finish CAT eliminator crossover and downpipe assembly. Fit for increased power and torque through the rev range.

Peak power increase of 4hp at 9000 RPM and torque increase of 5lb-ft at 3500rpm. Reduced weight and heat for improved comfort in summer. No remapping required, compatible with factory centre stand.

 This part is available by special order, request a quote

Bright finish CAT eliminator crossover and downpipe assembly. Fit for increased power and torque through the rev range.

Peak power increase of 4hp at 9000 RPM and torque increase of 5lb-ft at 3500rpm. Reduced weight and heat for improved comfort in summer. No remapping required, compatible with factory centre stand. See ENA01393 for exhaust gaskets (not included).

 This part is available by special order, request a quote

Pair of short reverse cone stainless steel performance silencers from Mistral, the polished reverse cone design compliments the classic styling of the V7 models. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding than the original silencers.
No remap required

Euro 4 compliant

All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. Note that the optional Guzzi factory centre stand requires stop bracket FRA33380 to prevent the stand touching the underside of the silencer.

Silencer gaskets now included with these silencers
No remap required

Release the music in your Guzzi!
See this video to hear this silencer

 Sorry, this part is no longer available.

Pair of short reverse cone stainless steel performance silencers from Mistral, the reverse cone design compliments the classic styling of the V7 models. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding than the original silencers.
No remap required

Also available in polished finish

Euro 4 compliant

All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. Note that the optional Guzzi factory centre stand requires stop bracket FRA33380 to prevent the stand touching the underside of the silencer.

Silencer gaskets now included with these silencers

Release the music in your Guzzi!
See this video to hear this silencer

 Sorry, this part is no longer available.

Pair of satin finish short reverse cone stainless steel performance silencers from Mistral, the polished reverse cone design compliments the classic styling of the V7 models. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding than the original silencers.
No remap required

Also available in black finish

Euro 4 compliant

All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. Note that the optional Guzzi factory centre stand requires stop bracket FRA33380 to prevent the stand touching the underside of the silencer.

Silencer gaskets now included with these silencers
NB polished finish shown in photos
Release the music in your Guzzi!

 This part is available by special order, request a quote

Performance deCAT kit for EURO5 models containing a set of big bore header pipes and 2-1 connecting pipe (link pipe) without CAT. The big bore downpipes improve exhaust gas flow resulting in improved torque and power though the rev range. The dowpipes are 50% lighter than the originals and combined with the 2kg weight saving from the mid pipe you'll see a noticable weight saving. Also available with a CAT by special order - enquire for details. This kit will also improve the exhaust note but for optimum results combine with a Mistral performance silencer and air filter SIA10433. We also recommend fitting a V-Twin Boost plug-in FUA85001 with this CAT eliminator to enrichen the mixture

• No remapping required
• CNC exhaust flanges included
• Significant weight saving
• Top spec AISI304 stainless steel (no rust!)
• Y piece is compatible with original heat shields and lambda probes
• Installation with graphite bushings to limit the transmission of vibrations
• Fixing bracket with antivibration silent block
• Straight through design for better performance and deeper sound
• Larger diameter internals for better exhaust gas flow
• Crossover is compatible with original system components
• Reduces engine operating temperature for better fuel consumption and efficiency
• Includes exhaust flanges, exhaust bushes (normal cost £30) and exhaust header gaskets
• Manufactured on the shores of Lake Como and developed using a rolling road

 This part is available by special order, request a quote

Black finish reverse cone stainless steel performance silencer from Mistral, the reverse cone design compliments the classic styling of this model. Supplied with DB killer this is a lightweight, stylish and durable upgrade

Benefits of Mistral silencers:

• Simple assembly
• Low weight -5.7kg weight saving
• Best sound and performance
• Specific brackets included
• Supplied with removable DBKiller
• Classic lines to enhance your bike
• Hand made to order on the shores of Lake Como
• Easy to install using existing mounting points
• Just 45cm long for improved styling
• Handcrafted product

Polished finish reverse cone stainless steel performance silencer with exclusive end caps from Mistral, the reverse cone design compliments the classic styling of this model.
Supplied with DB killer this is a lightweight, stylish and durable upgrade

Benefits of Mistral silencers:

• Simple assembly
• Low weight -3.8kg weight saving
• Best sound and performance
• Specific brackets included
• Supplied with removable DBKiller
• Classic lines to enhance your bike
• Hand made to order on the shores of Lake Como
• Easy to install using existing mounting points
• Just 45cm long for improved styling
• Handcrafted product