Shop headings: New Spares | Used Spares | Accessories | Brands
This section contains everything brake related from pads to banjo bolts and discs
Front Brembo type brake disc, 6 mounting holes. Not drilled. High quality Italian made part
Also known as Guzzi ref. 14613350. Minimum thickness for these cast brake discs is 5.8mm. Always fit new brake pads when replacing a brake disc - see BRA54724. These discs may have oily manufacturing residues on the surface, this should be cleaned off using a cleaning alcohol or brake cleaner before fitting. New pads and discs should be bedded in using normal bedding in procedures. Needs 6 brake disc bolts BRA99499
This part is due back in stock soon, call 01484 841395 to reserve yours
28613345 GU28613345 28 61 33 45
2861 3345 2861.3345 28.61.33.45
Also fits Benelli Sei
£225.00
INC VAT
£187.50 EX VAT
Brembo PS 16 handlebar mounted front master cylinder. This replaces the PS 15 handlebar mounted master cylinder which was unavailable for many years. The PS16 has a small rectangular fluid reservoir. Use this master cylinder if you are de-linking your brakes to ensure the correct piston operating ratio (if you retain the original PS12 or PS13 your front brakes are likely to feel 'spongy')
Supplied complete with lever and brake lever switch. Uses lever BRA28657 or BRA30605. Also known as Guzzi ref. 28660178. Can be used to replace round PS15 master cylinder BRA07338 and the discontinued PS16 Guzzi ref. 978606
This part is available by special order, request a quote
30660125 GU30660125 30 66 01 25
3066 0125 3066.0125 30.66.01.25
£225.00
INC VAT
£187.50 EX VAT
Complete Brembo F08 (P8) right hand (when mounted behind fork leg, otherwise use as LH) and rear Brembo brake caliper when mounted in underslung position (under and in front of wheel spindle). Supplied with bleed nipple, dust cover, pins, spring and a pair of brake pads, this is a replacement for the Brembo P8 single and twin bleed caliper
Supplied ready to bolt on and bleed. Also known as Guzzi ref. 18652201, 080137806. Ducati ref. 079937800.
This part is due back in stock soon, call 01484 841395 to reserve yours
17652360 GU17652360 17 65 23 60
1765 2360 1765.2360 17.65.23.60
Also fits Benelli 354, Benelli Sei, Ducati, Hesketh
£220.00
INC VAT
£183.33 EX VAT
Complete Brembo F08 (P8) front left hand (when mounted behind fork leg, otherwise use as RH) Brembo brake caliper. Also rear caliper (when mounted above and behind rear wheel spindle). Supplied with bleed nipple, dust cover pins and spring, this is a replacement for the Brembo P8 single and twin bleed caliper. This can also be used as a replacement for the P9 caliper used on the 1000 SP rear
Supplied ready to fit and bleed. Also known as Guzzi ref. 28653301, 28652301. Ducati ref. 079937806
This part is due back in stock soon, call 01484 841395 to reserve yours
18652201 GU18652201 18 65 22 01
1865 2201 1865.2201 18.65.22.01
Also fits Benelli 354, Benelli Sei, Ducati, Hesketh
£220.00
INC VAT
£183.33 EX VAT
Rear dished cast brake disc, black centre, 6 hole
Also fits Le Mans 1, Le Mans 2, Le Mans 3. A quality Italian sourced spare
Always fit new brake pads when replacing a brake disc - see BRA54724. Needs 6 x BRA98445
This part is due back in stock soon, call 01484 841395 to reserve yours
18635760-z 18635760 GU18635760 18 63 57 60
1863 5760 1863.5760 18.63.57.60
£195.00
INC VAT
£162.50 EX VAT
Brembo PS 13 handlebar mounted front master cylinder. The PS13 has a small rectangular fluid reservoir
Replaces Guzzi refs 28660178 and 30660180. Supplied complete with black or polished lever. Uses switch ELA30860
1 in stock
28660278 GU28660278 28 66 02 78
2866 0278 2866.0278 28.66.02.78
£185.00
INC VAT
£154.17 EX VAT
PS 15 rear master cylinder with plastic reservoir
Brembo no. 10.2426.00. Replaces original part with cast reservoir which is no longer available. Also replaces guzzi ref. 29667000. Please note that reservoir is slightly taller than the original, and you may need swap the operating arm from your old master cylinder if this is a different type.
This part is available by special order, request a quote
10438802 GU10438802 10 43 88 02
1043 8802 1043.8802 10.43.88.02
£158.00
INC VAT
£131.67 EX VAT
Complete twin bleed F09 (P9) front left hand (when mounted behind fork leg, otherwise use as RH) replica Brembo brake caliper. Also rear caliper (when mounted above and behind rear wheel spindle). Supplied with bleed nipples, dust cover, pins and spring. This can replace the P9 rear caliper as fitted to a 1000 SP, or can be used as a performance upgrade to replace the smaller piston P8 caliper fitted as standard to many Guzzis. Please see Guzziology for advice on how to perform this conversion.
Brake pads not included- see BRA33204
Availability varies on this part, check availability
£145.00
INC VAT
£120.83 EX VAT
Complete twin bleed F09 (P9) front right hand (when mounted behind fork leg, otherwise use as LH) replica Brembo brake caliper. Supplied with bleed nipples, dust cover, pins and spring. This can be used as a performance upgrade to replace the smaller piston P8 caliper fitted as standard to many Guzzis. Please see Guzziology for advice on how to perform this conversion.
Brake pads not included- see BRA33204
This part is available by special order, request a quote
£145.00
INC VAT
£120.83 EX VAT
Brembo type PS 15 handlebar mounted front master cylinder with plastic reservoir. Use this master cylinder if you are de-linking your brakes to ensure the correct piston operating ratio (if you retain the original PS12 or PS13 your front brakes are likely to feel 'spongy')
Use brake lever BRA14605 or BRA17606 for this master cylinder. See BRA30125 for replacement part
This part is due back in stock soon, call 01484 841395 to reserve yours
Also fits Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR, Ducati 350 Vento/Forza (1977-1985), Ducati 450 Desmo, Laverda, Hesketh
£143.00
INC VAT
£119.17 EX VAT