Please note this item uses a different connector which requires a medium sized uninsulated female spade connector to fit. The old style neutral switch is now discontinued

Also known as Guzzi ref. 19207200

 19207220 GU19207220 19 20 72 20
 1920 7220 1920.7220 19.20.72.20

Dimensions:
8mm thread

Front crank oil seal for models with Bosch or Ducati charging systems

Also known as Guzz ref. 90402839

 90402840 GU90402840 90 40 28 40
 9040 2840 9040.2840 90.40.28.40

Dimensions:
28mm x 38mm x 7mm

Replacement regulator rectifier for models fitted with the Ducati charging system. This is a quality unit and is supplied with fitting instructions

Connections: 2 x yellow male bullet, 1 x white female bullet, 1 x black ring, 1 x red ring. You will need to reuse your existing block connectors to connect this to your loom. See this wiring diagram for wiring connections

37703805-z 37703805 GU37703805 37 70 38 05
 3770 3805 3770.3805 37.70.38.05

One metre of copper core HT lead, this is superior to the more commonly available carbon core lead

Sold by the metre, one metre is enough for two leads on most models with coils under the fuel tank. For models with coils under the side panel you will need two metres. See ELA14715 and ELA14714 for plug caps and ELA20001 for coil screw cap. See ELA00001 for crimp on HT lead connector

Dimensions:
100cm

Pair of EBC FA018HH double-H sintered brake pads for P2 F08 (P8) calipers, best suited for fast road use. These give better braking but will wear brake discs more quickly than standard EBC pads

For P2 F08 calipers. Front and rear pads for all models except P9 equipped Spada where these are only for front calipers.
With the highest friction rating and a lifetime which is the envy of other Brake Pad Manufacturers, the Double-H pads are now available in a new quieter running, faster bedding formulation. NB if opting for sintered pads use them all round

28654601-z 28654601 GU28654601 28 65 46 01
 2865 4601 2865.4601 28.65.46.01

Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

Long (right hand) choke cable

We advise you to measure your existing cable before ordering in case you have a non standard set up.

 17133560 GU17133560 17 13 35 60
 1713 3560 1713.3560 17.13.35.60

Dimensions:
410mm outer, 70mm free length

Please note this item uses a different connector which requires a medium sized uninsulated female spade connector to fit. The old style neutral switch is now discontinued

Also known as Guzzi ref. 19207200

 19207220 GU19207220 19 20 72 20
 1920 7220 1920.7220 19.20.72.20

Dimensions:
8mm thread

Gearbox Bearing for input shaft output end and mid shaft (selector shaft) input end. Two bearings required per gearbox

also known as Guzzi ref 92256217. Two part bearing

 92256218 GU92256218 92 25 62 18
 9225 6218 9225.6218 92.25.62.18

Dimensions:
35mm OD

Standard length Fenda Extenda for your front mudguard. Finished in matte black to blend in with your bike's standard mudguard. This will protect the exhaust pipes and front engine cover on your Guzzi from road debris, salt, water and traffic grime thrown up by your front wheel Specifically designed to follow the contour of your bike's front guard, our Extenda Fenda is supplied with both plastic rivets for mechanical fitment and a sheet of our specially sourced 'Stick Fit Pads' for those customers who would prefer not to drill their front mudguard. Our Extenda Fenda is simple to install and will arrive safely packaged, together with comprehensive fitting instructions and all necessary fittings.

Complete Speedo (odometer) cable for models with white face Veglia speedo

We advise you to measure your existing cable and check that your speedo is made by Veglia before ordering in case you have a non standard set up.

01760400-z 01760400 GU01760400 01 76 04 00
 0176 0400 0176.0400 01.76.04.00

Dimensions:
1400mm inner length