Sump bolt kit containing all replacement stainless steel socket cap bolts

To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070)

Classic Le Mans 1 fairing cowling kit consisting of tinted screen with edging, black screen fasteners, quality replica cowling (pre drilled and manufactured exclusively for Gutsibits) in raw finish, side and lower fairing brackets.

We can also supply a headlamp ( LIA37593 or LIA37595 ), headlamp brackets, indicators and stems and most other parts you might need to turn your bike into Le Mans 1 lookalike, call or email for details.
To mount this fairing you can use 5 x FRA06016 + 5 x FRA29577 + 2 x FRA93060 - these are not included with the kit

 This part is due back in stock soon, call 01484 841395 to reserve yours

A set of 6 x titanium hex head brake disc bolts for front discs on all models except V7 III and V7 850 where you will need 2 kits (to cover front and rear) or 3 kits for V85TT and V100 where they are also used front and rear.

Also known as Guzzi ref. 03611445 2B009221 and 2B002416. 1 kit required per disc. Some models use shorter FRA81285 which is M8 x 16- checks parts book for exact listing.
Tensile strength of these bolts is 950 - 970Mpa.
Ideal for replacing standard disc bolts which corrode and have soft heads. These Ti bolts will look great for a very long time!

AP8152286

Dimensions:
M8 x 20mm

Rocker cover screw kit containing 16 replacement stainless steel socket cap bolts for round and square barrel engine rocker covers. Only one kit required per engine

To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). This kit is for models without billet rocker cover protectors fitted, for models with rocker cover protectors see SSA80015. This kit will suit a V11 with standard rocker cover protectors which are much thinner than aftermarket types.

See SSA81522 for rocker cover trim retaining screws on 2v/cyl CARC models, these are not included with this kit.

Rocker cover screw kit containing 12 replacement stainless steel socket cap bolts for two valve small twin rocker covers. Only one kit required per engine. Only for twin throttle body V7 models

To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). This kit is for models without billet rocker cover protectors fitted. This kit contains the correct screws for the Breva 750 and 2004 on V7 models but does not include the two flanged M5 screws SSA81523 that fasten the rocker cover covers to the rocker cover (on models other than the V7 Racer)

Dimensions:
M6 screws

Kit containing 8 long titanium shouldered retaining screws for your rocker covers. Upgrades the poor quality OE screws with shiny Ti parts

Rocker cover bolt kit for single throttle body models. Upgrade your corrosion prone zinc OE parts with a polished upgrade.

 887483 MG887483

Dimensions:
M6 x 50mm

Screw kit containing 28 replacement stainless steel socket cap bolts for timing cover, inlet manifolds and sump pan. Only one kit required per engine. See SSA87983 and SSA89291 for special rocker cover screw kits

To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070).

Add a bit of sparkle to your V7!

Dimensions:
M6 screws

Kit containing 8 titanium shouldered retaining screw for rocker cover. Upgrade your corrosion prone zinc OE parts with a polished upgrade.

Rocker cover bolt. We recommend that you check length of bolts on your engine before ordering as two lengths of bolt were used. Supercedes Guzzi ref. 976591
See ENA83249 for rubber sealing washer

 This part is due back in stock soon, call 01484 841395 to reserve yours

 842291 MG842291

Dimensions:
M6 x 13mm

Kit containing 6 titanium shouldered retaining screws for rocker cover. Upgrade your corrosion prone zinc OE parts with a polished upgrade. Note that one bolt on each cover is hidden under a plastic cover, if you would prefer to only buy four bolts then see SSA84291

Rocker cover bolt kit. We recommend that you check length of bolts on your engine before ordering as two lengths of bolt were used. Supercedes Guzzi ref. 976591
See ENA83249 for rubber sealing washer

 This part is due back in stock soon, call 01484 841395 to reserve yours

 842291 MG842291

Dimensions:
M6 x 13mm

Grey Moto Guzzi sticker featuring the Guzzi eagle. Perfect for mudguards, tanks, screens and anywhere else that will take a sticker.

Grey oval sticker with black border. Ideal for covering up marks on bodywork!

Dimensions:
62mm x 28mm