Nylon/PVC 18 litre tank bag with base and fixing system. Features waterproof zips, reflective inserts and a rain hood to keep your personal effects dry even in the worst conditions. Bag can be detached from the tank and carried around using the handy shoulder straps. One large central compartment and two smaller side pockets plus a map pocket in the top make this a handy bag for touring and everyday use

Supplied with tank harness

 This part is available by special order, request a quote

 06481500 GU06481500 06 48 15 00
 0648 1500 0648.1500 06.48.15.00

Dimensions:
18 litre

Lightweight 5mm battery plate in a silver finish, supplied with countersunk M8 screws

This is an upgrade to the standard steel plate, perfect for your Tonti framed special (it will also fit Cali 1100 and Cali EV based specials. On some models you may need to enlarge the cut out for the speedo cable

 This part is available by special order, request a quote

14418200-z 14418200 GU14418200 14 41 82 00
 1441 8200 1441.8200 14.41.82.00

Dimensions:
249mm x 204mm x 5mm overall

Set of highly polished aluminium round barrel rocker covers (Guzzi ref. 17023550 or 17023560). Ideal for finishing off your restoration project

This rocker cover set also known as Guzzi ref. 14023550, these can be fited to square barrel models if fitted with adapter kit ACA30310

 This part is available by special order, request a quote

 17023560 GU17023560 17 02 35 60
 1702 3560 1702.3560 17.02.35.60

Gorgeous polished aluminium reservoir cap for PS12 Brembo master cylinder fitted to front brake on many models, fits rear master cylinder on more recent models

Make your Guzzi stand out from the crowd!

 This part is available by special order, request a quote

 10430830 GU10430830 10 43 08 30
 1043 0830 1043.0830 10.43.08.30

Dimensions:
53mm OD

Pair of adjustable Tommaselli clipons, quality aluminium castings and chrome plated tube

These clip ons pivot on the central bolt to adjust the handlebar angle, pull back angle is adjusted on the fork stanchion clamp. These clip ons are unsuitable for use with the PS12 handlebar master cylinder. Bar ends are held in by a rivet and some modification will be needed if you wish to fit bar end mirrors.

 This part is available by special order, request a quote

Dimensions:
For 35mm stanchions, 223mm usable handlebar, 75mm total height, 30mm tall stanchion clamp

Pair of beautiful black stainless steel silencers made by Agostini of Mandello del Lario. Easy to install using existing mounting points, and allow use of standard panniers. Useful increase in power and torque, and lighter than stock.

Supplied as a separate link pipe and silencer with removable baffle. The baffle is easily removed by taking off the retaining circlip in the rear of the silencer.
Not approved for road use. These do not fit the Audace

 This part is available by special order, request a quote

Pair of reverse cone stainless steel performance silencers from Mistral finshed in black, the reverse cone design compliments the classic styling of the V7 models. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding than the original silencers

All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. Note that the optional Guzzi factory centre stand is not compatible with these silencers (unless you make up a centre stand stop bracket to prevent the stand touching the underside of the silencer). Silencer gaskets now included with these silencers
No remap required

Release the music in your Guzzi!

 This part is available by special order, request a quote

Pair of beautiful polished stainless steel silencers made by Agostini of Mandello del Lario. Easy to install using existing mounting points, and allow use of standard panniers. Useful increase in power and torque, and lighter than stock.
Laser cut Agostinis logo.

Supplied as a separate link pipe and silencer with removable baffle. The baffle is easily removed by taking off the retaining circlip in the rear of the silencer.
Not approved for road use

 This part is available by special order, request a quote

Tough Xplorer top box / top case to match Hepco and Becker Xplorer panniers, ideal for enduro touring. Extremely endurable combination of black anodised aluminium sheet and coloured shock-resistant plastic.

• Completely waterproof thanks to special seals
• Made of 1.5 mm thick plate aluminum and highly
impact-resistant plastic molding
• Absorbs impacts and ground contact
• Stable metal locks, integrated carrying handles
• Case and top case available with simultaneous
locking (please specify when ordering)
• Takes a full-face helmet
• Innovative side hinged design
• Fits all H&B rear racks and aluminum racks

 This part is available by special order, request a quote

Dimensions:
31cm (h) x 37.3cm (l) x 47cm (w)

Black 55 litre Junior top box / top case to match Hepco and Becker Junior Flash panniers. This is the classic Hepco and Becker top box design. Sized to take two helmets

• Silver painted covers can be removed for colour matching to your bike
• Unbreakable, special double walled shell made of impact resistant plastic which absorbs bumps and falls
• Completely waterproof thanks to special seals
• Fitted with rugged metal locks and an ergonomic carry handle
• Aerodynamic design
• Racks and accessories available separately

This is a great value top case which are quickly and securely fitted to any Moto Guzzi. The discreet and classic styling looks right on any Guzzi from the 1970's to the present day. Supplied with two keys. See LUA70127 for a Guzzi badge to fit these panniers. This latches to any Hepco or Guzzi rack with a oblong section at the rear, e.g. LUA61051

 This part is available by special order, request a quote

Dimensions:
57cm (w) x 44cm (l) x 31cm (h)