The BoosterPlug is an effective and cost efficient way to cure the fuelling problems common to all modern fuel injected Guzzi's.
Plugging directly into the wiring harness using original connectors, with no cutting or splicing required, installation takes less than ten minutes.

The BoosterPlug features a unique technology to provide your bike with a controlled fuel enrichment in all ambient temperature situations. No other Plug and Play device does this. A richer mixture is provided only when needed i.e at low RPMs and when accelerating. On open roads at a constant speed the Boosterplug sits idle to keep fuel consumption low.
Make your bike run as it should have done from the factory!

• Improved and gentler throttle action when opening and closing throttle
• Richer mixture when opening the throttle improves acceleration
• Booster plug removes the uneven low speed running that is typical for modern lean burn engines
• Stronger and more consistent at idle.
• Reduced backfiring with aftermarket exhausts on engine braking
• Lifetime warranty

 This part is due back in stock soon, call 01484 841395 to reserve yours

The BoosterPlug is an effective and cost efficient way to cure the fuelling problems common to all modern fuel injected Guzzi's.
Plugging directly into the wiring harness using original connectors, with no cutting or splicing required, installation takes less than ten minutes.

The BoosterPlug features a unique technology to provide your bike with a controlled fuel enrichment in all ambient temperature situations. No other Plug and Play device does this. A richer mixture is provided only when needed i.e at low RPMs and when accelerating. On open roads at a constant speed the Boosterplug sits idle to keep fuel consumption low.
Make your bike run as it should have done from the factory!

• Improved and gentler throttle action when opening and closing throttle
• Richer mixture when opening the throttle improves acceleration
• Booster plug removes the uneven low speed running that is typical for modern lean burn engines
• Stronger and more consistent at idle.
• Reduced backfiring with aftermarket exhausts on engine braking
• Improved fuel economy

Brembo PS 13 handlebar mounted clutch master cylinder, supplied complete with lever.

 This part is available by special order, request a quote

Set of minimal black C-Bow pannier carriers. Unobtrusive on the bike they allow the easy mounting and quick release of Hepco C-Bow panniers (e.g. LUA62230 ).

The C-Bow bag holder is made to take a variety of Hepco & Becker bags, depending on the motorcylce model. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design fits perfectly into the vehicles overall lines. Naturally, it keeps saddlebags safely away from the hot exhaust silencers. Modern C-Bow technology allows the right bags to be attached simply and easily to the C-Bow with a single click, firmly locking them to deter theft. The bags are attached securely to the motorcycle and stay in position even when loaded. On many models, the turn signals stay in their original position. Please check manual for more info.

recommended load: 5kg per bag (please check manual or motorcycle manufacturer for more info) can mostly be combined to topcasecarrier, sissybars or other rear carrier (please check manual or bike specific info) rear rack enlargements can possibly restrict the function of the bags

 This part is available by special order, request a quote

Set of minimal black C-Bow pannier carriers. Unobtrusive on the bike they allow the easy mounting and quick release of Hepco C-Bow panniers (e.g. LUA62230 ).

The C-Bow bag holder is made to take a variety of Hepco & Becker bags, depending on the motorcylce model. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design fits perfectly into the vehicles overall lines. Naturally, it keeps saddlebags safely away from the hot exhaust silencers. Modern C-Bow technology allows the right bags to be attached simply and easily to the C-Bow with a single click, firmly locking them to deter theft. The bags are attached securely to the motorcycle and stay in position even when loaded. On many models, the turn signals stay in their original position. Please check manual for more info.

recommended load: 5kg per bag (please check manual or motorcycle manufacturer for more info) can mostly be combined to topcasecarrier, sissybars or other rear carrier (please check manual or bike specific info) rear rack enlargements can possibly restrict the function of the bags

 This part is available by special order, request a quote

Set of minimal black C-Bow pannier carriers. Unobtrusive on the bike they allow the easy mounting and quick release of Hepco C-Bow panniers (e.g. LUA62230 ).

The C-Bow bag holder is made to take a variety of Hepco & Becker bags, depending on the motorcylce model. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design fits perfectly into the vehicles overall lines. Naturally, it keeps saddlebags safely away from the hot exhaust silencers. Modern C-Bow technology allows the right bags to be attached simply and easily to the C-Bow with a single click, firmly locking them to deter theft. The bags are attached securely to the motorcycle and stay in position even when loaded. On many models, the turn signals stay in their original position. Please check manual for more info.

recommended load: 5kg per bag (please check manual or motorcycle manufacturer for more info) can mostly be combined to topcasecarrier, sissybars or other rear carrier (please check manual or bike specific info) rear rack enlargements can possibly restrict the function of the bags

 This part is available by special order, request a quote

Spare cable rubber for Tommaselli twin pull throttle assemblies ACA10501 and ACA10500

Dimensions:
67mm x 31mm

Carbon fibre tank pad with Moto Guzzi emblem

Stylish way to prevent your tank getting scratched, see ACA04001 for a plain black tank protector

 This part is due back in stock soon, call 01484 841395 to reserve yours

If you would like to be emailed once this item is available again then click here

Genuine Guzzi centrestand kit, invaluable for maintenance and safe parking

Note that due to supplier quality issues the paint finish on these may show wear marks from transit.

 This part is available by special order, request a quote

Stylish guard to protect your centre stand from damage. This beautifully made part is manufactured from stainless steel plate for maximum protection and longevity. Drilled to save weight this is an essential accessory if you take your Stelvio off road

 Sorry, this part is no longer available.

Dimensions:
280mm x 230mm x 20mm